Ducati V4 / V4S / V4R Panigale Heat Shield Kit, 2018-2021

RSR Moto SKU: V4-HS

$123.00 USD

UK Shipping is free on orders over £20.00. International shipping is calculated at the checkout.

Sick of roasted nuts? The Ducati V4 Panigale Heat Shield Kit is a custom, die-cut heat shield set designed to drastically reduce radiant heat from the seat/bodywork of your Panigale V4 / V4S / V4R. It works with all seat configurations- stock, comfort, racing, etc.

Compatible with all 2018-2021 Panigale V4 models.

NOTE: Plastic bodywork, subframe, seat are not included- only the heat shielding material itself!

An aluminised, adhesive fibreglass material is used to create the heat shields. It's capable of withstanding radiant heat up to 2000°F, and the adhesive can withstand temperatures of 500-600°F, so there's no need to worry about the material being damaged by heat from the engine or exhaust. The kit has undergone many months of development and real-world testing on several bikes in extreme Southern California desert heat, and has held up perfectly! Zero degradation of the aluminised surface or adhesive has been noted.

The kit comes with a full-colour instruction manual detailing the installation process.

Check out the thermal imaging, which showcases a massive difference in seat/bodywork temperature after installation of the heat shield kit. These were taken on a FLIR thermal camera after a 40-minute ride consisting of about 30 minutes freeway, and 10 minutes on local streets.

Prior to installing this kit on my V4S Panigale, I was convinced the bike was unusable as a daily rider - there was just too much heat, especially in slow traffic around town. This kit completely changed my mind and I find myself using my V4 for even the most mundane journeys and deriving even more enjoyment from it than before.

It's not a small investment, but given the significant development time, material cost, and benefits to your manhood (and womanhood!), I hope you'll agree that it's a great value!

Still not convinced? Check out the FAQ below!

FAQ: Ducati Panigale V4 Series (2018-20210 Heat Shield Kit

Isn't this just cheap aluminium tape?

The material we use is not aluminium tape! It's a flexible fibreglass material with an aluminised surface, similar to exhaust heat wrap. The amount of material required to make a single kit costs over £40 on Amazon! And don't forget the hundreds of hours we spent perfecting the intricate shapes required to match the Panigale's bodywork, testing our solution to ensure its safety and effectiveness, creating a full-colour instruction manual, sourcing material, and working with die-cutting suppliers to get the kits mass-produced. There's always the DIY option, but our solution will save you countless, precious hours!

Is the heat shield material safe & durable?

The material is capable of withstanding radiant heat up to 2000°F, and the adhesive can withstand temperatures of 500-600°F, so there's no need to worry about the material being damaged by heat from the engine or exhaust. The kit has undergone many months of development and real-world testing on several bikes in extreme Southern California desert heat, and has held up perfectly! Zero degradation of the aluminised surface or adhesive has been noted.

Where does all the heat go? Will the engine run hotter?

The plastic bodywork and seat are not designed to be part of the bike's cooling system, or to transmit heat. Installing the Heat Shield Kit keeps the heat in the rear cylinder, where the bike's cooling system is able to effectively dispose of it, as designed! We've performed countless months of hot-weather testing, and found the bike to run no hotter than normal! The only side effect is far less heat on your thighs and man parts.

Is the heat shield kit difficult to install?

The kit comes with a full-colour, 4-page instruction manual detailing the install process. Anyone with very basic hand tools and about 40 minutes of free time can install it! Required tools include only 3mm/4mm hex keys, 8mm socket, and a flathead screwdriver! This YouTube video also details the process for the Panigale 1199 but it's similar for all kits.

Are the heat shields visible once installed?

Nope, the heat shields are installed on the inside of the bodywork, and are completely invisible once installed. Your bike's beauty will remain totally intact!

Will installation of the heat shield kit void my warranty?

No! There's no modification you can do to your bike that will void your warranty. If your dealership is telling you this, then they're extremely dishonest, and you should find a new dealer. Unless a failure on your bike can be directly attributed to an aftermarket modification, the warranty will be fully honoured.

Do you ship internationally?

We ship worldwide.