Gå til innholdet
Internasjonale bestillinger: Alle gjeldende skatter, avgifter og importkostnader beregnes og kreves inn ved utsjekking.
Bestillingen din sendes med disse kostnadene forhåndsbetalt, så det skal ikke være noe mer å betale før levering.
Samme dags utsendelse på bestillinger lagt inn før kl. 15.30 man-fre (unntatt offentlige helligdager)
Honda CB500F CB500 Hornet CBR500R CB500X CL500 Rebel 500 Titanium Sprocket Nuts

Honda CB500F CB500 Hornet CBR500R CB500X CL500 Rebel 500 Titanium Sprocket Nuts

av RSR Moto
£19.74 - £19.74
£19.74
£19.74 - £19.74
£19.74

Frakt og avgifter

  • Prisene inkluderer MVA (omsetningsavgift)
  • Frakt i Storbritannia er gratis på bestillinger over £20
  • For internasjonale bestillinger blir MVA og tollavgifter innkrevd ved utsjekking slik at pakken din kan sendes med avgiftene betalt. Ingen ekstra kostnader før levering.
  • Internasjonal frakt beregnes ved utsjekking.
  • Finn ut mer om importavgifter her

High-performance titanium rear sprocket nuts from RSR Moto.

Suitable for the following Honda motorcycles:

  • CB500F / CB500FA, 2013-2023
  • CB500 Hornet, 2024-2026 (inc E-Clutch models)
  • CBR500R / CBR500RA, 2013-2026
  • CB500X / CB500XA, 2013-2023
  • NX500, 2024-2026
  • Rebel 500, 2017-2026 (inc S & SE versions)
  • CL500, 2023-2026
  • SCL500, 2024-2026

 

Product Information

  • Guaranteed not to rust or otherwise corrode
  • 45% lighter than steel equivalents
  • Attractive polished finish that will not fade
  • Precision made from Grade 5 6AI-4V titanium
  • Pack contents: x5 sprocket nuts


Installation

  • Clean the threads of your sprocket studs and apply a small amount of high-strength thread lock to each one
  • Torque each nut to the manufacturer's specification for the original fastener


International Customers

  • Postage costs are automatically combined when you order more than one item from us
  • All items are sent by fully tracked airmail


Specification

  • Tensile strength: Heat treated to 950Mpa~1000Mpa
  • Yield strength: 870Mpa~925Mpa
  • Hardness: 30 HRC-40HRC
  • Shear strength: 500Mpa~550Mpa
  • Elongation: 14%~18%
  • Working temperature: Up to 500°C


Why RSR Moto Titanium?

  • Race-proven products at competitive prices
  • No-quibble full money-back guarantee on all products
  • Same-day dispatch on orders received before 3.30pm (Mon-Fri)
  • Industry-leading levels of customer service
  • All enquiries are answered promptly and courteously